Wiring diagram 1:
+V : 12V + input
- V: 12V - input
NO: Output , normal open
COM:Output , common
NC: Output , normal close
About Working mode:
Momentary: Push the remote button , the relay connects, release the remote button , the relay dis-connects.
Toggle: Push once the remote button , the relay connects , push twice the remote button , the relay dis-
connects
Latching: Push the remote button A, the relay connects, push the remote button B, the relay dis-connect.
Time delay mode :Push the remote control button , the relay connects , from when release the remote button ,
after 5s or 10s or 15s , the relay disconnect automatically
Clearing the code :
Push the learning button on the receivers for 8 times , the codes will be cleaned .
After clearning the code, all the remote control cannot work any more.
Learning the code : (momentary)
Push the learning key on the receiver once time , it comes into momentary setting mode .
Wait for a moment , the LED will be off , it comes into learning state .
Push the remote button , LED indicator on the receiver board will flash then come off .
After 3 seconds, the LED indicator will be on again , learning successfully .
Learning the code : ( Toggle )
Push the learning key on the receiver twice time , it comes into toggle setting mode
Wait for a moment , the LED will be off , it comes into learning state .
Push the remote button,LED indicator on the receiver board will flash then come off.
After 3 seconds , the LED indicator will be on again , learning successfully .
Learning the code : ( Latching )
Note: When you choose for latching mode , in order to learn more remote control , you need to learn two
different button , the first time learnt is for "ON", the second time learnt for "OFF".
For example : button A = ON , button B = OFF
Push the learning key on the receiver triple time , it comes into latching mode .
Wait for a moment , the LED indicator on the receiver board will flash then come off.
Push the remote button A
LED flash for 5 times
Push the remote button B
Led flash for 5 times
After 3 seconds , the LED indicator will be on again , learning successfully
A = ON , B = OFF
Learning the code : ( Time delay mode )
Push the learning key on the receiver forth time , the time dealy for 5 seconds
Push the learning key on the receiver fifth time , the time delay for 10 seconds
Push the learning key on the receiver sixth time , the time delay for 15 seconds
The LED indicator will be off
Push the remote button , LED flashes and off
After 3 seconds , the LED indicator will be on again , learning successfully
Specifications:
Input Power:DC10V-14V
Standby Current:<5MA
RF Frequency:315M or 433M
RF working mode:superheterodyne
Receive sensitivity: >97dbm
Transmitting distance: 20 meters above
Decoding mode:MCU software decoding
Remote storage: 25 pcs
Support remote type: Learning code, Fixed code(Rolling code can be design)
Working mode:Momentary, Toggle, Latching Time delay (5s ,10s ,15s )
Wiring type:fixed terminal
Output Terminal :NO , NC , COM
Size: 3.4x3cm/1.34x1.18inch 5.5x2.8cm/2.17x1.1inch
Quantity: 1 Set
Note:
1.Transition: 1cm=10mm=0.39inch
2.Please allow 0-3cm error due to manual measurement. pls make sure you do not mind before you bid.
3.Due to the difference between different monitors, the picture may not reflect the actual color of the item.
Thank you!
No Retail Package
Package includes:
1 Pc x Receiver Module with shell
1 Pc x Remote Controller